Uniden BCD996T manual Setting Location Information, Setting the Fleet Map Type I Only

UB335ZH.book Page 71 Friday, March 17, 2006 4:35 PM

This setting controls whether the scanner automatically skips channels it identifies as data. This includes channels with either no audio or a constant-level audio source. If turned on, the scanner resumes scanning as soon as it detects the data signal.

Setting Location Information C

[MENU] Program System

Select a Conventional system

Edit Sys Option

Set LocationInfo

This setting control whether the system is automatically enabled and disabled when you connect a GPS to the scanner.

Set Latitude — Enter the system’s latitude using the format you selected in the system settings.

Set Longitude — Enter the system’s longitude using the format you selected in the system settings.

Set Range — Set the system’s range using the units you selected in the system settings.

Set GPS Enable — L/O status is automatically controlled by receiving data from GPS.

Setting the Fleet Map	M (Type I Only)
[MENU] Program System
Select a Motorola Type I system
Edit Sys Option
Edit Fleet Map

Preset — select from the 16 most common fleet maps

Custom — allows you to enter a custom fleet map. Enter the size code (0 to 14) for each block. Press to select.

For Motorola Type I systems, you must enter a system fleet map in order for the scanner to properly track and display talk group ID’s. The fleet map is usually included in the same resource that provided system frequencies and talk group ID lists.

Note: If you don’t know the fleet map for your Motorola Type I system, check the Internet such as www.radioreference.com or the other websites we reference.

Programming Your Scanner

71