Uniden BCD996T manual UB335ZH.book Page 13 Friday, March 17, 2006 435 PM

UB335ZH.book Page 13 Friday, March 17, 2006 4:35 PM

“Soft” Search Keys — Lets you quickly search specified ranges.

Channel Lockout — You can lock out any system, group, frequency, or channel while scanning. If you lock out a system or group, any channels belonging to that system or group are also locked out.

Frequency Lockout — You can lock out up to 500 frequencies (250 permanently locked out + 250 temporarily locked out). The scanner skips locked-out frequencies while using the Close Call™ feature or while searching.

CTCSS and DCS Squelch Modes — Prevent interference from stations not using the tone code you select.

Analog and Digital Audio AGC — Helps automatically balance the volume level between different radio systems.

Fire Tone-Out Standby — Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 10 settings (transmit frequency, tone frequencies) then select one for standby monitoring. Up to ten tone-outs on the same RF setting can be scanned at one time.

Broadcast Screen — Sets the scanner to ignore Close Call™ or search hits on known broadcast frequencies including common pager frequencies.

Custom Screen — Lets you input up to 10 frequency ranges that the scanner will ignore during Close Call™ or search operation.

Scan/Search Delay — The scanner pauses at the end of a transmission to wait for a reply. You can set the delay time for each system you scan, and while searching and using the Close Call™ feature.

Attenuator — Reduces the input strength of strong signals by about 20 dB.

Repeater Reverse — Automatically switches to the input frequency on a conventional repeater system.

Channel Alert — Alerts you when there is activity on any channel you specify using your choice of nine unique alert tones.

Memory Check — Lets you see at a glance how much total memory is left.

Search with Scan Operation — Lets you include selected service searches or custom search ranges during normal scan operation.

Custom Alerts — For each alert in the scanner (such as channel alert, Close Call alert, emergency alert), you can select from 9 different tone patterns and also set the alert volume level independently from the main volume level.

Introduction

13