Uniden BCD996T manual Troubleshooting, Press SCAN/SEARCH, SCAN/SEARCH to scan

UB335ZH.book Page 127 Friday, March 17, 2006 4:35 PM

Problem	Possible Cause	Suggestion
Scan won’t start.	You must press	Press [SCAN/SEARCH].
	[SCAN/SEARCH] to scan.
	The squelch might need to be	Adjust the squelch threshold. See “Turning
	adjusted.	On the Scanner and Setting the Squelch”
		on Page 45.
	One or more channels might be	Make sure the channels you want to scan
	locked out.	are not locked out.
	The antenna might need to be	Check the antenna connection.
	adjusted.
Weather scan doesn’t	The squelch might need to be	Adjust the squelch threshold. See “Turning
work.	adjusted.	On the Scanner and Setting the Squelch”
		on Page 45.
	The antenna might need to be	Check the antenna connection.
	adjusted.
	There might not be a NOAA	Move to an area with a NOAA weather
	weather broadcast in your	broadcast.
	area.

If you experience difficulty while in TrunkTracker™ mode, try the following steps.

Problem	Possible Cause	Suggestion
Scanner won’t track a	The system might not be one	Change to another system and try
trunked system.	your scanner can scan.	scanning that system.
	The data frequency might be	Enter the data frequency.
	missing.
	The scanner might need to be	Change to a Type 1 scanner setup. See
	changed to a Type 1 scanner	the programming instructions on the web
	setup.	at www.uniden.com/scanners.
	The system you are trying to	Set the scanner to scan LTR or EDACS
	scan might be LTR or	systems. See the programming
	EDACS.	instructions on the web at
		www.uniden.com/scanners.
	No ID’s have been	Program one or more ID’s or use the ID
	programmed.	Search mode.
	The ID’s you have stored are	Wait for the ID’s to become active or scan
	not active.	another system.

Troubleshooting

127