Uniden BCD996T - page 87

87
Programming Your Scanner
For each channel, you can select the audio type that the chan nel receives.
[MENU]  Program System 
 Select the system 
 Edit Group
 Select the channel group 
 Edit Channel 
 Select an existing channel 
 Set Audio Type 
Select from All, Digital Only, Analog Only 
All — The scanner automatically determines whether the audio i s analog or
digital.
Digital Only — The scanner only remains on the channel if it is carr ying APCO
25 digital audio
Analog Only — The scanner only remains on the channel i f it is carrying analog
audio.
If you are programming a conventional system and se lect Analog Only, the
scanner prompts you to select the CTCSS/DCS tone setting. See the next section.
To program a channel with a CTCSS or DCS setting, your conventional system
audio must be set to Analog Only first.
[MENU]  Program System 
 Select the system 
 Edit Group 
 Select the channel group 
 Edit Channel 
 Select the channel 
 Set Audio Type 
 Analog Only 
At this point you can scroll to CTCSS or DCS and select the subaudibl e frequency
in the CTCSS range or the DCS code.
 CTCSS or DCS 
Setting the Audio Type MECL
Selecting CTCSS/DCS Tones C
UB335ZH.book Page 87 Friday, March 17, 2006 4:35 PM