Uniden BCD996T manual Setting the Site Startup Key, Setting Site Frequencies, Set Frequencies

UB335ZH.book Page 78 Friday, March 17, 2006 4:35 PM

Notes:

•Access single-digit system/site Quick Keys by pressing the single digit on the keypad during scanning. Access two-digit system Quick Keys by pressing [.No] then both digits.

•You can assign as many systems to the same quick key as you want.

•To be scanned, a system’s Quick Key must be activated and the system must be unlocked.

Setting the Site Startup Key MESL

[MENU] Program System

Select a trunked system

Edit Site

Select a Site

Set Startup Key

Select a startup key from 0-9 or select “.” for no startup key.

Notes:

•To unlock the system at startup, press and hold the selected startup key while you turn on the scanner.

•The system Quick Key is also enabled.

•If you press a different key at startup, the system is locked out.

•If you do not assign the system a startup key, the system is not affected by any key press during startup.

Setting Site Frequencies	MESL
[MENU] Program System
Select a trunked system
Edit Site
Select the site
Set Frequencies
New Frequency (or select an existing frequency)	Input a system

frequency using the number keys and [.No] key, then press . If you are entering frequencies for an LTR or EDACS system, the scanner will also prompt you to enter the LCN for the frequency you just entered. LCN’s (logical channel numbers) are provided from the same source where you got the other system information.

To enter additional frequencies, press [MENU], then to select New Frequency. Then repeat the above.

78