Uniden BCD996T manual Search and Close Call Options, Managing Locked-Out Frequencies, Store

Search and Close Call Options

The settings in this section affect custom searches, service searches, and Close Call operation. The following table shows what options are available for various search modes.

Setting	Service	Custom	Quick	Search	Close Call	CC Auto	CC Hits
	Search1	Search1	Search	and Store		Store	System
Freq. Lockouts	•	•	•	•	•	•
Broadcast		•	•	• 2	•	•
Screen
CTCSS/DCS	•	•	•	•	•	•
Search
Repeater Find		•	•		•
Max Auto Store				•		•
Set Delay Time			•		•		•
Set Modulation			•		•	•
Set Attenuator			•		•	•
Set Data Skip	•		•	• 3	•	•	•
Set Step			•
Set Record			•		•		•
Adjust P25	•		•		•		•
Level

1 — Valid only for searching a range using Search with Scan. 2 — Valid only for storing a frequency from Search and Store. 3 — Valid only for storing a frequency from Service Search.

Managing Locked-Out Frequencies

While searching or during Close Call operation, if you press [L/O] while the scanner is stopped on a frequency, that frequency is locked out of these modes. The temporary L/O frequency limit is 250. The permanent L/O frequency number limit is up to 250.

Search and Close Call Options

105