Uniden BCD996T manual Weather, Search

Control Channel Only Scanning — If the scanner is set to scan a Motorola system, you can set it so it scans using only control channel data. You do not have to program voice channel frequencies into memory in this mode as long as all possible control channels are programmed.

Adaptive Digital Threshold — Automatically sets the digital decode threshold for APCO 25 systems.

GPS

Location Based Scanning — If you connect a GPS unit to the scanner it can automatically enable and disable systems based on the Location Information (longitude, latitude, Range) that you provide.

GPS Non-Radio Based Features — The scanner alerts you to Dangerous Intersections, Speed Alerts, and Points of Interest that you program into the scanner.

GPS Display Mode — Lets you display extended GPS information such as Distance to a POI, Direction to a POI, Time to a POI, Speed, Position, and more.

Weather

Weather Search — Lets your scanner receive your local NOAA weather transmission.

SAME Weather Alert — Lets your scanner sound an alert when a SAME weather alert signal is transmitted on a NOAA weather channel. The scanner also displays the transmitted alert type. This helps you quickly find out about severe weather in your area and lets you avoid false alarms.

WX Priority — Lets your scanner alert you when a weather alert is transmitted on a NOAA weather channel.

Search

Service Search — Lets you quickly select and search the scanner’s preprogrammed frequencies.

Custom Search — Lets you program up to 10 custom search ranges. You can search any of these ranges simultaneously.

CTCSS/DCS Search — Lets the scanner search for CTCSS or DCS tones or codes on any channel or during a search. The scanner can identify up to 50 CTCSS tones and 104 DCS codes.

Introduction

15