Uniden BCD996T manual Set Record, Setting Channel Alert, Set Alert

This setting controls whether the scanner treats the channel as a priority channel while scanning. Select On or Off, then press F.

On — when you turn on the Priority feature, the channel will be scanned every 2 seconds.

Off — the channel will not be treated with priority. The default setting is Off.

Setting Channel Alert			MECL
[MENU] Program System			F
Select a system		F
Edit Group	F
Select a channel group F
Edit Channel		F
Select the channel		F
Set Alert	F

Off — the scanner does not alert you when the channel becomes active.

Alert 1 - 9 — the scanner sounds an alert beep to notify you that the channel has become active. You can choose any of 9 different beep types. Once you choose an alert tone, then:

Set Level F

Auto — the scanner automatically sets the channel alert beep to match the master volume level.

Level 1 - 15 — the scanner adjusts the volume of the beep to the level you select.

Set Record

[MENU] Program System F

Select a system	F
Edit Group	F

Select a channel group F

Edit Channel	F
Select a channel	F
Set Record	F

On — the scanner outputs the signal.

Off — the scanner does not output any audio.

90