Manuals / Uniden / Computer Equipment / Scanner

Uniden BCD996T manual Setting the Site Startup Key, Setting Site Frequencies, Set Frequencies F

Models: BCD996T

1 152
Download 152 pages 3.39 Kb
Page 78
Image 78

Notes:

•Access single-digit system/site Quick Keys by pressing the single digit on the keypad during scanning. Access two-digit system Quick Keys by pressing [.No] then both digits.

•You can assign as many systems to the same quick key as you want.

•To be scanned, a system/site’s Quick Key must be activated and the system must be unlocked.

Setting the Site Startup Key

MESL

[MENU] Program System F

 

Select a trunked system F

 

Edit Site

F

 

Select a Site

F

 

Set Startup Key F

Select a startup key from [0] to [9] or select [.No] for no startup key.

Notes:

•To unlock the system at startup, press and hold the selected startup key while you turn on the scanner.

•The system/site’s Quick Key is enabled when it is unlocked.

•If you press a different key at startup, the system is locked out.

•If you do not assign the system a startup key, the system is not affected by any key press during startup.

Setting Site Frequencies

MESL

[MENU] Program System F

 

Select a trunked system F

 

Edit Site

F

 

Select the site

F

 

Set Frequencies F

 

New Frequency (or select an existing frequency)

F

Input a system frequency using the number keys and [.No] key, then press F. If you are entering frequencies for an LTR or EDACS system, the scanner also prompts you to enter the LCN for the frequency you just entered. Obtain LCN’s (logical channel numbers) from the same source as the other system information. To enter additional frequencies, press [MENU], then to select New Frequency. Then repeat the above.

78

Page 77 Page 79
Page 78
Image 78
Uniden BCD996T manual Setting the Site Startup Key, Setting Site Frequencies, Set Frequencies F
Page 77 Page 79