Uniden BCD996T manual Setting Site Location Information, Adjust P25 Level

This setting determines the frequencies you need to enter for Motorola systems. Select your setting, then press F.

On — You only need to enter control channel frequencies.

Off — You must enter all voice and control channel frequencies.

Note: The scanner defaults to On.

Setting Site Location Information			MESL
[MENU] Program System		F
Select a trunked system	F
Edit Site (current)		F
Select a site F
Set LocationInfo	F

This setting control whether the system is automatically enabled and disabled when you connect a GPS to the scanner.

Set Latitude — Enter the system’s latitude using the format you selected in the system settings.

Set Longitude — Enter the system’s longitude using the format you selected in the system settings.

Set Range — Set the system’s range using the units you selected in the system settings.

Set GPS Enable — Depending on the data received from the GPS, the L/O status of the site is automatically controlled.

Adjust P25 Level		MEL
[MENU] Program System		F
Select a trunked system	F
Edit Site (current)		F
Select a site F
Adjust P25 Level	F

This setting determines some site-specific parameters for digital channels. In most cases, setting this to Auto provides the best performance. However, you can also manually set the digital decode threshold. This setting affects all channels in the current site. See “Optimizing P25 Performance” on Page 52.

82