Uniden BCD996T manual Programming Sites, Copying Systems, Deleting Systems, Setting the Site Name

Copying Systems MECSL

Occasionally you might want to copy and rename a system to highlight one group over another.

One system might be called City - Fire and the same system City - PD with adjustments to data within.

This lets you quickly locate the desired set of data.

To copy a system including all settings, groups, and channels:

[MENU] Program System	F
Select the existing system	F
Copy System F
New Sys Name?

Enter your new name using the Scroll Control and [4] and [6] to traverse the display and enter characters. Press F when finished.

Deleting Systems	MECSL
[MENU] Program System	F
Select the existing system	F
Delete System F
Confirm Delete?
Yes=”E” / No= ”.”

Important: Deleted systems cannot be restored. You must re-enter them.

Programming Sites MESL

This section covers settings that apply to trunked radio site. You must program at least one site for each trunked radio system. When you program multiple sites, all sites share the same channel groups and channels within the system.

Note: You can only program one site in an EDACS SCAT and LTR system.

Setting the Site Name ME

Each site name can be up to 16 characters. Abbreviate as necessary to fit. The site name alternates with the Channel group when the scanner stops on a channel.

The default site names include the following letter in the 16th position to indicate the system type:

76