Uniden BCD996T manual Setting the System Hold Time, Setting ID Scan/ID Search, Setting Data Skip

Setting the System Hold Time				C
[MENU] Program System			F
Select a conventional system			F
Edit Sys	Option	F
Set Hold	Time	F

Set how long the scanner will remain scanning on this system before moving to the next system (up to 255 seconds). Note that the scanner will scan all unlocked channels at least one time, regardless of the system hold time setting.

Setting ID Scan/ID Search		MEL
[MENU] Program System		F
Select a system F
Edit Sys Option	F
ID Scan/Search	F

Sets whether the scanner only stops on talk groups you have programmed in (ID Scan) or whether the scanner stops on any unlocked channel (ID Search).

Setting Channel Delay Time		MELCS
[MENU] Program System F
Select a system F
Edit Sys Option	F
Set Delay Time	F

This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from [1] to [5] or Off,

then press F.

Notes:

•The default setting is 2 seconds for each system.

•This setting applies to all channels within the system.

Setting Data Skip		C
[MENU] Program System		F
Select a Conventional system		F
Edit Sys Option	F
Set Data Skip	F

70