Uniden BCD996T Locking/Unlocking Systems, Locking/Unlocking Channels, ID Scan/ID Search Mode

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does not scan even if its quick key is selected.

1.Tap F to switch to the Function Mode then rotate the control to select the desired system.

2.Press [L/O] to temporarily lock out the system. Temporary L/O appears. Or, quickly press [L/O] twice to permanently lockout the system. Locked Out appears.

3.To unlock temporarily locked out systems, turn power off and then back on. To unlock permanently locked out systems, repeat Steps 1 and 2. System Unlocked appears.

Locking/Unlocking Channels

If the scanner has stopped on a channel press [L/O] once to temporarily lock it out or quickly press [L/O] twice to permanently lock it out. Cycling power off/on automatically unlocks temporarily locked-out channels.

To lockout a channel when the scanner has not stopped on the channel, or to unlock a permanently locked-out channel.

1.	Press [HOLD/RESUME] to hold on a channel.
2.	Tap F to switch to the Function Mode , then rotate the control		to select the
	system where the channel is stored.
3.	Tap F or wait 2 seconds, then rotate the Scroll Control	to select the
	channel you want to lock or unlock.

4.Press [L/O] to temporarily lock or unlock the current the channel. Double-tap L/O to permanently lockout the current channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner can be in either ID Scan or ID Search mode:

•ID Scan — the scanner only stops on talk group ID’s (TGID) that you have programmed into the system that are unlocked.

•ID Search — the scanner stops on any unlocked talk group that becomes active.

48