5.Store the frequency.
11 12 13
(OSCAN)6) @ @
14 15 18
@@@
8 BE 07 @18@19
8FT 20
B80@@ Press
BANK 1
p 1 lf50.150 11Hz
12.5 IOta NFII
The channel number stops flashing and a beep sounds.
If the frequency is stored in another channel, you hear a beep and the other channel appears in the display.
BANK 1
p ~.n CH 3lf
12.5 IOta NFM
Further press @ to store the frequency in
the selected channel, or press <!) twice to cancel.
Repeat these steps to program more channels.
Use the banks to store similar frequencies (e.g., local police frequencies) together. This helps the UBC3000XL T scan faster.
Notes:
. If you make a mistake, press <!) twice and start over.
. If you enter an invalid frequency, a beep sounds and ERROR appears. Repeat Step 4.
Automatic Battery Save
If you let the UBC3000XL T sit idle while you are programming channels (as you look up more frequencies, for example), the scanner may switch to the Battery Save Mode. The display does not change.
To conserve batteries, the UBC3000XL T switches to Battery Save when:
. In Manual Mode
. Delay is OFF
. No signal is received for 60 seconds
11
