Using Signal Attenuation
You can use the Signal Attenuation feature in the manual, search, or Scan Mode.
When the ATT indicator is on, the incoming signal strength is attenuated (reduced) by about 14 dB. This prevents unusually strong signals from
In the Scan Mode, you must individually program each channel you want to use the Signal Attenuation feature.
In the Search Mode
1.Set the search limits and press EJ .
See "The Search Mode" on Page 27.
2. Turn Signal Attenuation on.
f313€)@@
8FT 20
B[30@@
Press E]8"8J~
AM NFM WFM
8138 (8 8
BANK
SRCHAATT
138 888.888 11Hz
12.& KHz NFII
All signals are reduced during the search.
Press ~ again during search to turn off Signal Attenuation for the Search Mode.
In the Scan Mode
When the scanner stops on a channel:
88€)@@
8FT 20
BI30@@
Press E]8"8~
AM NFM WFM
88888
BANK 2
ATT
P31 '-186.98111Hz
In the Manual Mode:
Tum Signal Attenuation on for a specific channel.
1.
11- - | |||
(OSCAN):1 0 |
| @ | |
|
|
| channel |
1 | 14 | 15 | 16 I |
OMANUA 1 | @ @ @: | number. | ||
BSAVE 1 | 17 | 18 191 | Then, | |
§38:€)@@: | ||||
press | ||||
| ||||
[3 l3 | 0 |
| ||
2.
E313€)@@
8FT 20
(3(30@@
Press E]E3"E]~
AM NFM WFM
80J [3 8] E3
To.change, press ~ again.
37
