If unlocked, the scanner first scans all selected systems, then searches the selected service searches for the selected hold time (0-255 seconds).

Editing a Service Search

You can change the way service search works for each service.

Menu

OR

Search for ...

Func

+Scan/Srch

Edit Service

Select your setting, then press the scroll control.

Set Delay Time This setting determines how long the scanner waits after a transmission ends before resuming quick search or Close Call operation. Select your setting, then press the scroll control.

Off The scanner resumes immediately when the transmission ends.

1-5 sec The scanner waits the set amount of time after the transmission ends before resuming.

Note: The default setting is 2 sec.

Set Attenuator This setting controls the attenuator for search operation. Select your setting, then press the scroll control.

Off The attenuator is off.

On Reception is attenuated by about 18 dB.

Note: Turn on this setting if you are near other strong signal sources. Attenuation sometimes helps to reduce interference and desensitization that strong signals create.

Search with Scan This setting controls how search with scan works.

Searching and Storing

98

Page 100
Image 100
Uniden UBC396T specifications Editing a Service Search, Edit Service