
(Master scanner) Clone Master Press SCAN Key
Scan
(Slave scanner) Clone Slave Press SCAN Key
Scan
When you are ready to clone the scanner, press Scan on the slave scanner first, then on the master scanner. The master scanner checks the connection between the two scanners, then transfers its data to the slave scanner.
When the transfer is complete, Complete appears on both scanners. If the transfer did not work, Error appears on the master scanner.
On-Air Cloning
You can clone (copy) data from a PC to a BCD396T scanner. This is useful if you want to quickly program 20 or more BCD396T scanners at the same time.
Note:
Menu Xfer Information
On-Air Clone
•Start Cloning Start
•Set Frequency Lets you set the frequency where your scanner receives the cloning broadcast.
•Set Modulation Lets you set the cloning broadcast’s modulation type.
To clone (copy) data from a PC to the scanner, you need a transceiver, a PC that has an audio input, and a cable to connect your PC’s sound card to the transceiver. Follow the directions supplied with the Uniden Advanced Scanner Director Software (avail- able online at http://www.uniden.com) to construct a cable and use
When you are receiving the cloning broadcast and are ready to clone the scanner, select Start Cloning
Other Settings
58