Turning Power Save On or Off

Menu

Settings

Set Battery Save

On The scanner goes into low-power mode when you monitor a conventional channel that has no activity.

Off Power save is off.

Priority Scan

Menu

Set Priority

Or, while holding on any channel, press to select one of these priority modes:

Off Normal scanning

Func

+1/Pri

On While scanning a conventional system, the scanner interrupts every 2 seconds and checks the priority channels in each unlocked conventional system. Priority channels in lower priority key numbered systems (starting from 1) have highest priority. PRI appears when you select this mode.

Plus On The scanner only scans priority channels in unlocked conventional systems. PRI flashes when you select this mode.

Using the Backlight

Menu

Settings

 

Set Backlight

10

sec

The backlight stays on for 10 seconds

 

after you press .

30

sec

The backlight stays on for 30 seconds

after you press .

Squelch The backlight turns on when the squelch opens then stays on for 5 seconds.

Other Settings

54

Page 56
Image 56
Uniden UBC396T specifications Turning Power Save On or Off, Priority Scan, Using the Backlight, Other Settings