Programming Motorola Systems
Menu
Program System
New System
MOT
Next, rotate the scroll control to select the type of Motorola system you want to program, then briefly press the scroll control to select it.
•P25 - Use for Motorola Astro APCO 25 Digital systems in any band
•800MHz Standard - Use for 800 MHz systems that use the standard band plan
•800MHz Splinter - Use for 800 MHz systems that use the splinter band plan (typically near international borders)
Note: Splinter systems have frequencies below 866 MHz that end in 0. For example, 851.0250 would be the frequency of a splinter system.
•900MHz Band - Use for 900 MHz systems
•VHF band - Use for VHF systems
•UHF band - Use for UHF systems
Confirm? Yes=”E” / No=”.”
Next, refer to the appropriate section to set system- wide options. For most settings, you can accept the default. However, for the items in bold, you must enter information in order for your scanner to scan the system.
•See “Editing the System Name” on Page 74
•See “Editing the System Quick Key” on Page 75
•See “Setting System Lockout” on Page 75
•See “Setting the System Hold Time” on Page 76
•See “Setting the Channel Delay Time” on Page 76
•See “Setting ID Scan/Search (Trunked Systems Only)” on Page 77
•See “Editing the Fleet Map (Motorola Systems Only)” on Page 77 (must be set up for Type I and Type II Hybrid systems)
Programming Radio Systems
63
