Uniden UBC396T specifications Using Tone-Out, Fire Tone-Out Introduction, Setting Tone-Out Standby

Using Tone-Out

Fire Tone-Out Introduction

Your scanner can be set to respond to fire tone-outs that use standard two-tone sequential paging, short one-tone paging, and long group tone paging. You can save up to 10 settings. When you select a setting in standby mode, the scanner also monitors for any other setting that uses the same transmit frequency, modu- lation, and attentuation settings.

You need tone-out setup information from the agency you wish to monitor.Check with your local agency or on-line resources. Uniden America Corporation has no information regarding local tone-out systems.

Setting Tone-Out Standby

Menu

Tone-Out for...

Tone-Out Standby

Turn the scroll control to select the tone-out to monitor. All tone-outs that have the same frequency, modula- tion, and attenuation setting as the one you select, are also monitored.

In standby mode, the display cycles through all moni- tored tone-out settings.Regardless of the current dis- play, the scanner always alerts on any received tone- out that matches a stored setting.

If you press HOLD while in standby mode, the scanner temporarily exits the mode and you hear all transmis- sions on that frequency. No alerts sound, even if a tone-out matches one you have stored. Press HOLD again to return to standby mode.

Setting Up Tone-Out

MenuTone-Out for ... Tone-Out

Setup

Scroll to select the tone-out (1 - 10) you want to pro- gram, then press EYES. Then you can scroll to any of the following settings and press EYES to select and modify the selected settings:

Using Weather Alert (SAME)

116