Programming Conventional Systems
Menu
Program System
New System
Conventional
Confirm? Yes=”E” / No=”.”
The scanner creates an empty conventional system,
with a default name of System n C. n is a number that increments as you add new systems. C indicates that this is a conventional system.
Refer to the appropriate section to set
•See "Editing the System Name" on Page 74
•See “Editing the System Quick Key” on Page 75
•See “Setting System Lockout” on Page 75
•See “Setting the System Hold Time” on Page 76
•See “Setting the Channel Delay Time” on Page 76
•See “Deleting Systems” on Page 83
•See “Copying Systems” on Page 83
•See “Entering/Editing Conventional Channel Groups” on Page 61
Entering/Editing Conventional Channel Groups
To enter channels in a conventional system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Menu
Program System
Select the system
Edit Group
New Group
Programming Radio Systems
61
