Enter a talk group ID

Note: You can enter I-Calls by pressing then the I-Call number. You can enter the I-Call wild card by pressing then 0.

Refer to the appropriate section to change a channel setting:

See “Adjusting the P25 Level (Motorola and Con- ventional Systems Only)” on Page 81

See “Editing the Channel Name” on Page 86

See “Editing the Talk Group ID (Trunked Channels Only)” on Page 88

See “Setting Channel Lockout” on Page 91

See “Deleting Channels” on Page 92

See “Copying/Pasting Channels” on Page 92

To program another channel within the same group, press Menu , then repeat the above. To create another channel group and enter more channels, press Menu three times, then proceed from “Entering/Editing Motorola Channel Groups” on Page 66.

Programming EDACS Systems

Menu

Program System

New System

EDCS

Confirm? Yes=”E” / No=”.”

Next, rotate the scroll control to select the type of EDACS system you want to program, then briefly press the scroll control to select it.

WIDE - Use for wideband EDACS systems

NARROW - Use for narrowband EDACS systems

SCAT - Use for EDACS SCAT (Single Channel Autonomous Trunking)

Confirm? Yes=”E” / No=”.”

The scanner creates an empty EDACS system, with a

default name of System n

E.

Programming Radio Systems

67

Page 69
Image 69
Uniden UBC396T specifications Programming Edacs Systems, Edcs