Setting the Audio AGC, Settings Set Audio AGC | Uniden UBC396T

•Keypress The backlight turns on when any key is pressed then stays on for 10 seconds.

•Infinite The backlight turns on when you press then stays on until you press again.

Pressing any key while the backlight is on extends the

backlight period. Pressing while the backlight is on turns off the backlight.

Setting the Audio AGC

Menu

Settings

Set Audio AGC

This setting helps balance the audio level you hear as you listen to different radio sources so you can hear them at a similar volume. Use this setting if you listen to an audio source that has natural changes in audio level for which you want to compensate.

Analog Rotate the scroll control to select. This setting lets you set the audio AGC for receiving analog channels.

•On Press the scroll control to select. Audio AGC is turned on.

•Off Press the scroll control to select. Audio AGC is turned off.

Digital Rotate the scroll control to select. This setting lets you set the audio AGC for receiving digital channels.

•On Press the scroll control to select. Audio AGC is turned on.

•Off Press the scroll control to select. Audio AGC is turned off.

Adjusting the Display Contrast

Menu

Settings

Adjust Contrast

Contrast 1 - 15 the scanner adjusts the display to the contrast level you select.

Other Settings

55

Image 57

Uniden UBC396T Setting the Audio AGC, Adjusting the Display Contrast, Settings Set Audio AGC, Settings Adjust Contrast

Contents

Congratulations on Your Purchase Warranty for Australia/New Zealand BCD396T OWNER’S Manual Precautions Precautions Precautions Contents Contents 100 125 FCC Wants You to Know Scanning LegallyFCC Wants You to Know FCC Wants You to Know Introduction Introduction Feature Highlights Feature Highlights Feature Highlights Trunk Tracking Weather Priority Using the Multifunction Scroll Control About This ManualEntering Text How the Scanner’s Controls Are Represented in This Manual Menu Program SystemEdit Name = Edacs = LTR Understanding Scanning What is Scanning?Understanding the Scanner’s Memory Understanding Scanning What is CTCSS/DCS? What is Searching? 023 025 026 031 032 036 043 047 Conventional Scanning What is Trunk Tracking? Simplex OperationRepeater Operation Trunked Scanning Motorola Trunking Types of Trunking Systems Understanding Scanning Edacs Trunking LTR Trunking Where To Get More Information Call Motorola/EDACSInformation On The Internet These web sites are not affiliated with Uniden Corporation Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Using Internal BatteriesSetting Up Your Scanner Using Rechargeable Batteries Removing the Display Sticker Using AC Power Connecting an Earphone/Headphone Connecting the AntennaConnecting an Extension Speaker Connecting an Optional Antenna Attaching the Belt Clip Attaching the Wrist StrapLook At The Keypad Hold Pri Rcl Look At The Display Setting Up Your Scanner Using Func Using Menu Once. Volume Level and a number appear on the display Turning On the Scanner and Setting the SquelchBasic Operation Basic Operation Preprogrammed System Tips Scanning Systems Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking SystemsLocking/Unlocking Channels ID Scan/ID Search Mode Temporarily Holding On a SystemHolding On a Channel Quickly Storing an ID During ID Search Quick-Storing Channels or Talk Group ID’sQuick Tgid Save? Quickly Recalling Channels Monitoring Trunking ActivityToggling Channel Alpha Tags Using the Menu Using the Menu Close Call Only Menu Option Menu Submenu Programming Systems Menu Edit Name Adjusting the Key Beep Other SettingsDisplaying System Information Locking/Unlocking the Keypad and Scroll Using the Backlight Turning Power Save On or OffOther Settings Priority Scan Adjusting the Display Contrast Setting the Audio AGCSettings Set Audio AGC Settings Adjust Contrast Initializing the Scanner’s Memory Connecting Your Scanner to a Personal Computer Wired Cloning Using the Cloning OptionsSettings PC Control Xfer Information Wired Clone Master scanner Clone Master Press Scan Key On-Air CloningSlave scanner Clone Slave Press Scan Key Menu Xfer Information On-Air Clone Other Settings Programming Radio Systems Programming Radio Systems Entering/Editing Conventional Channel Groups Programming Conventional SystemsProgram System New System Conventional Confirm? Yes=E / No= Program System Entering/Editing Conventional Channels Edit GroupEdit Channel New Channel Program System New System Programming Motorola Systems Set Frequencies Setting System Frequencies Setting Attenuation Setting ModulationSet Modulation Set Attenuator Entering/Editing Motorola Channels Entering/Editing Motorola Channel Groups Edcs Programming Edacs Systems Set Frequencies New Frequency Entering/Editing Edacs Channels Entering/Editing Edacs Channel Groups Program System New System Confirm? Yes=E / No= Programming LTR Systems Entering/Editing LTR Channel Groups Entering/Editing LTR Channels/ Talkgroups Programming Radio Systems System-Level Settings Programming/Editing Optional SettingsEditing the System Name Editing the System Quick Key Setting System LockoutEdit Sys Option Set Quick Key Edit Sys Option Set Lockout Setting the Channel Delay Time Setting the System Hold TimeEdit Sys Option Set Delay Time Edit Sys Option Set Hold Time Editing the Fleet Map Motorola Systems Only Setting ID Scan/Search Trunked Systems OnlyEdit Sys Option ID Scan/Search Edit Sys Option Edit Fleet Map Edit Sys Option Set Status Bit Setting the Motorola Status Bit Motorola Systems Only Setting I-Call Motorola and Edacs Systems Only Setting the End Code Operation Motorola Systems OnlyEdit Sys Option Set End Code Edit Sys Option Set I-Call Setting Control-Channel Only Motorola Systems Only Setting Emergency Alert Motorola and Edacs Systems OnlyEdit Sys Option Emergency Alert Set Level Reviewing Locked Out Frequencies Edit Sys Option Adjust P25 LevelClearing All Locked-Out IDs Edit Sys Option Rvw ID Srch L/O Edit Sys Option Edcs ID Format Setting the Edacs ID Format Edacs Systems Only Deleting Systems Setting System Attenuation Trunked Systems OnlyCopying Systems Delete System Group-Level Settings Entering/Editing the Group NameCopy System New Sys Name? Setting the Group Quick Key Setting Group LockoutDeleting Groups Editing the Channel Name Channel-Level SettingsDelete Group Edit Channel Setting Channel Priority Conventional Channels Only Editing Frequencies Conventional Channels OnlyInput Frequency Setting Channel Alert Editing the Talk Group ID Trunked Channels OnlySet Alert Setting CTCSS/DCS Conventional Channels Only Edit TgidSet CTCSS/DCS Setting the System Frequency Modulation Setting Channel Attenuation Conventional Channels OnlySrch/CloCall Opt Set Modulation Edit Group Setting Channel Lockout Copying/Pasting Channels Deleting ChannelsDelete Channel Copy Channel Paste Channel Service Search Searching and StoringSearching and Storing Quick Search CTCSS/DCS SearchSrch/CloCall Opt CTCSS/DCS Search Custom Search Search forCustom Search Edit Custom Editing a Custom Search Range Edit Service Editing a Service Search Auto Search and Store Selecting a System Storing a Conventional SystemSearch for Search and Store Storing a Trunked System Optimizing P25 Performance Optimizing P25 Performance Using the Close Call Feature Using the Close Call Feature Close Call Setting Close Call Options Select Mode Select Beep10/15/30/45/60 sec Infinite Close Call Hits Managing Locked-Out Frequencies Search and Close Call OptionsSearching for Subaudible Tones Unlocking All Frequencies Srch/CloCall Opt Broadcast Screen Screening Out Broadcast Sources Srch/CloCall Opt Repeater Find Finding Repeater Output Frequencies Setting the Modulation Type Setting the Maximum Auto Store ValueSetting Attenuation Srch/CloCall Opt Max Auto Store Srch/CloCall Opt Set Data Skip Setting Data Skip Setting the Search Frequency Step Setting the Delay TimeSrch/CloCall Opt Set Delay Time MenuSrch/CloCall Opt Set Step Using Weather Alert Same Using Weather Alert SameSearching For a Weather Broadcast Turning Weather Alert On/Off WX Operation Weather Alert Programming a Same Group Setting WX Alert Priority WX Operation Program SameWX Operation WX Alt Priority Setting Tone-Out Standby Using Tone-OutSetting Up Tone-Out Fire Tone-Out Introduction 117 118 Cleaning Care and MaintenanceCare and Maintenance General Use Birdies Repairs Troubleshooting Troubleshooting 122 123 124 Specifications Specifications 126 127 Optional Accessories Optional Accessories Preset Fleet Maps AppendixAppendix 130 Type I Programming Information User Defined Fleet Maps Size Code Restrictions Planning Collecting InformationPlanning 134 System Name and Quick Key Filling Out The Motorola WorksheetGroup Name and Quick Key Frequency-Alpha Tag-Priority System Type System FrequenciesFleet Map Type I or Type I/Type II Hybrid Only Filling Out the LTR and Edacs Worksheet Band Plan VHF or UHF OnlyTalk Group ID-Alpha Tag-Alert System Frequencies and LCN Conventional System Worksheet Conventional System Worksheet Motorola System Worksheet Motorola System Worksheet 141 LTR/EDACS System Worksheet 143 Preprogrammed Systems Preprogrammed SystemsDade County 145 146 147 148 149 One-Year Limited Warranty One-Year Limited Warranty 151 152 153 Register Online Today