Solving Problems
If you have any trouble with your system, try these simple steps. If you are still having a problem with your camera, check the manual that came with your camera.
If… | Try.. | |
Motion detection won’t | • Increasing the motion sensitivity (see page 24). | |
• Checking the settings on the Record Schedule screen (see | ||
respond to movement. | ||
page 22). | ||
| ||
|
| |
Motion detection goes off | • Decreasing motion sensitivity (see page 24). | |
when there’s nothing there. | • Refer to General Placement Considerations on page 6. | |
|
| |
I can’t play my video clips | • You must install Uniden Media Player to play back recorded files. | |
in another program | This player is found on the CD included in the box. | |
I schedule a recording, | • Ensure that the system time is set to the current time. | |
save the schedule, and the | ||
• Make sure that the SD card is inserted into the monitor and there is | ||
recording does not happen | ||
still memory available on that card. | ||
at the scheduled time. | ||
| ||
|
| |
| • Making sure the camera is plugged in and the red LED is on. | |
| • Making sure the camera is paired to the correct channel. | |
The camera’s signal status | • | |
icon shows no bars | • Moving the camera closer to the monitor; it might be out of range. | |
| • Making sure the camera setting is turned on (refer to Activate or | |
| Deactivate screen on page 21). | |
|
| |
The camera’s signal status | See General Placement Considerations on page 6 for tips on | |
icon shows one or two bars | ||
improving video quality. | ||
or the video quality is poor | ||
| ||
|
| |
The camera won’t pair with | • Making sure the camera is plugged in and the red LED is on. | |
• Pressing and releasing the pairing button quickly. Do not press and | ||
the monitor | ||
hold the pairing button. | ||
| ||
|
|
53
