Unitech PA967, PA966 user manual 1D Scanning, Show Data Only, Auto-Scan

PA966/967 User's Manual

1D Scanning

The PA966 can be equipped with either a 1D laser bar code scanner or a 2D imager. Following are the procedures for 1D scanning. For 2D scanning, refer to page 22.

Select the Test tab near the top of the screen. Tap Menu at the bottom of the screen and a list of options will appear.

Show Data Only

Select his function if you simply want the scanned data to appear on the screen, one scan after another.

Select Show Data Only.

Auto-Scan

In the same menu select Start Auto-Scan.

In the pop-up menu (shown to the right) select the time interval you want between scans. Example shown is 3 seconds. Click Start.

Now the laser will scan every three seconds. Aim the laser at the target bar codes and each read bar code will appear on your PA966’s screen (Data Only mode shown to the right).

18