At this point, you’ll either:
∙Be able to find the Sportster Winmodem 33600 & x2/56K group in the Program Manager window: If you can find this group, you’re ready to install the communications software.
OR
∙If the computer cannot configure the modem automatically, you will get a Configuration dialog box. You will have to choose an available I/O address and an available IRQ. (NOTE: Do not check the Let Plug & Play configure… option.)
∙For the I/O address: Choose any on the list.
∙For the IRQ: The COM port/IRQ combinations shown here work with most computer
If you choose | Then try |
this COM port: | this IRQ: |
1 | 4 |
2 | 3 |
3 | 5, 7 or 9 |
4 | 5, 7 or 9 |
If you have a sound card, SCSI card, or game card, it might be using IRQ 5 or 7. Do not make 5 or 7 your first choice then, because it might not be available.
If the configuration you’ve chosen works, you should be able to find the Sportster Winmodem 33600 & x2/56K group in the Program Manager window. If you can find this group, you’re ready to install the communications software following the directions page 11.
Sportster Winmodem 33600 & x2/56K - User's manual | 9 |
