USRobotics x2/56K, 33600 user manual Registers, Reg Default Function

&Zn=s Writes phone number string s to NVRAM at position n (n = 03).

&Zn=L Writes last executed dial string to NVRAM at position n (n = 03).

&Zn? Displays the phone number stored at position

n(n = 03).

&ZL? Displays the last executed dial string.

S-Registers

∙Default values are appropriate for most users. The settings are modified with the ATSr=n command, where r is the number of the S register and n is a decimal value between 0 and 255 (unless otherwise stated).

∙Use ATSr? to examine the configuration of a register. For example:

$76￿"￿(QWHU

Reg	Default	Function
S0	0	Sets the number of rings on which to answer
		in Auto Answer Mode. When set to 0, Auto
		Answer is disabled.
S1	0	Counts and stores the number of rings from
		an incoming call. (S0 must be greater than
		0).
S2	43	Stores the ASCII decimal code for the es-
		cape code character. Default character is +.
		A value of 128 – 255 disables the escape
		code. The range of acceptable values is
		country-dependent.
S3	13	Stores the ASCII code for the Carriage
		Return character. Valid range is 0–127.
S4	10	Stores the ASCII decimal code for the Line
		Feed character. Valid range is 0–127.
S5	8	Stores the ASCII decimal code for the Back-
		space character. A value of 128255 disables
		the Backspace key’s delete function.

46 Sportster Winmodem 33600 & x2/56K - User's manual