$7,￿￿￿(QWHU!￿

The modem will respond to this command by displaying a list of the configuration settings.

To modify them, please refer to Appendix A.

Resetting the Modem to Factory Settings

Some transmission sessions can modify the modem's configurations. If you are unsure of the current configuration of the modem or if it seems to be not working correctly, you might want to reset it to the factory settings.

To do this:

1.Run the communications program.

2.Go into the program's terminal mode.

3.Type:

$7￿)￿￿(QWHU!

This re-initialization includes resetting the hardware flow control, a fixed speed on the communication port and complete result codes.

If you want to set software flow control on (XON/XOFF), type the following command instead:

$7￿)￿￿(QWHU!

On the other hand, some communications programs let you choose the modem in a menu list. If you can't find your modem there, you can enter these initialization strings above in the settings screen of the application.

Sportster Winmodem 33600 & x2/56K - User's manual 17

Page 21
Image 21
USRobotics 33600, x2/56K user manual Resetting the Modem to Factory Settings