USRobotics 33600 There is no audible, Tone when you try to, Respond to incoming, Calls

There is no audible	The speaker is turned off; reset the
tone when you try to	modem's settings to the factory settings.
call.	The cables are not correctly connected.
	Check all connections from the
	telephone wall jack to the modem.
	There is a problem with the telephone
	line; check it using a standard telephone
	set.
	You are connected to an incompatible
	telephone network. Refer to the section:
	‘Utilization Notes’ in this manual.
The modem does not	Check that the application's auto-answer
respond to incoming	mode is turned on.
calls.	Some office networks use a low voltage
	call signal that the modem cannot
	recognize. Try connecting the modem to
	a line that is not part of this type of
	network.
The modem connects	Incorrect software configuration. Check
to the remote modem,	that the transmission speed, the parity
but the text received	and the number of stop bits defined in
is illegible.	the software correspond to the settings
	of the remote modem. Data compression
	could be used on one of the modems
	and not on the other. Check the flow
	control. If required, reconfigure the
	modem to the factory settings.
Using a certain	Check the way the application initializes
terminal emulation	the modem :
application, the	$7￿)￿(QWHU!
modem sends back
many transmission	This re-initialization includes resetting
errors.	the hardware flow control.
	If you want to set software flow control
	on (XON/XOFF), type the following
	command instead:
	$7￿)￿.￿￿(QWHU!

Sportster Winmodem 33600 & x2/56K - User's manual 23