Vermont Casting DVBR36, DVBR42 manual Natural Gas, Pilot Conversion PSE, Pilot Conversion SIT

Shutter	Burner Pan
Retaining
Screw

Air Shutter	Front View
		CO103
Fig. 63 Remove air shutter from burner pan.

Burner Pan

Shutter Retaining

Screw

Front View

Natural Gas

Slots Open

CO127

Fig. 64 Conversion Air shutter.

Burner

Top View

Hex Nut

Manifold

Mounting

Bracket

Screw CO128

Fig. 65 Locating manifold mounting bracket.

Manifold

Bracket

Manifold	Orifice
Split Nut	FP1554

Fig. 66 Manifold mounting bracket.

NOTE: It is not necessary to remove the pilot tube for conversion.

Pilot Conversion - PSE

1.Loosen pilot hood turning counterclockwise using a 7/16” end wrench. (Fig. 67)

2.Remove pilot orifice with needlenose pliers. (Fig. 68)

3.Install LP pilot orifice.

4.Re-install pilot hood and tighten until mark on pilot hood aligns with mark on pilot bracket. Conversion is complete.

DVBR Series Direct Vent Gas Fireplace

		Pilot Hood
Index
Marks
Pilot Bracket		CO105
Fig. 67	Removing pilot hood.

	Pilot Orifice
	CO106
Fig. 68	Removing pilot orifice.

Pilot Conversion - SIT

1.Remove pilot hood by lifting up. (Fig. 69)

2.Remove pilot orifice with Allen wrench. (Fig. 70)

3.Install conversion pilot orifice.

4.Reinstall pilot hood. Be sure to align pilot hood with index tab.

Conversion is complete.

Pilot Hood

Pilot

Bracket

CO105a

Fig. 69 Remove pilot hood.

Index Tab Allen Wrench

Pilot

Bracket

CO106a

Fig. 70 Remove pilot orifice.

20000584 31