Vertical Communications 8324S Storing The System Speed Dial Numbers, Press Intercom Dial # 0 0

Models: 8324F 8312S 8324S

1 160
Download 160 pages 40.41 Kb
Page 124
Image 124

Using The Attendant Features

GCA70–250

10.10 Storing The System Speed Dial Numbers

You can store up to 500 system speed dial numbers at your attendant telephone. Typically, these are numbers that are frequently called by many different users and emergency numbers that you want readily available to everyone. Distribute a list of these stored numbers to the system users.

To program system speed dial numbers,

1.Record the following information on the system speed dial record sheet:

the dialing code of the storage location (000999),

the line that will be used to access each outside number,

the telephone numbers you are storing.

2.Press INTERCOM.

3.Dial # 0 0 2.

4.Dial code for storage location (000–999).

5.Dial code to make your speed dial route selection choice from the following list:

NOTE: If the code for the desired line is less than three digits, dial # once after you dial the line code. (For example, dial 1# for line 1 or 19# for line 19.) dial 1#–99#to select lines 1–99

dial 1#–99#to select lines 1–99,

dial 100–128to select lines 100–128, dial 801–816to select line groups 1–16, dial 000 to select prime or last line used, dial 888 to select intercom.

6.Dial the number to be stored (up to 32 digits long—include and

# if needed).

NOTE: You may need a pause between numbers to compensate for differences in response time between your system and the host system. To store a pause, press HOLD, then continue dialing. If your system is behind a host system that needs a hookflash to access a feature, press TAP to store a hookflash, then continue dialing.

7. Press TRANSFER/CONFERENCE to store number.

10 – 20 LCD Speakerphone Reference Manual

Page 124
Image 124
Vertical Communications 8324S, 8312S, 8324F Storing The System Speed Dial Numbers, To program system speed dial numbers