Using The Other Telephone Features |
7.15 Setting The Volume Control
The volume control on your telephone is a multipurpose control you can use to set the volume (loudness) of the ringer, the speaker, the handset, the headset, background music, and the group listening mode. You can either press and hold down the VOLUME UP or VOLUME DOWN button to automatically step through the volume levels for each mode, or you can press the switch once for each change in volume you desire.
You may adjust the loudness of the distant party at any time during a call whether you are listening over the speaker, the headset, the handset or the group listen mode by pressing the VOLUME UP or VOLUME DOWN button. When the call ends, the system resets the loudness of all future calls to the programmed (default) setting.
You can set a permanent loudness level for any volume control setting. When loudness is at desired level, dial ✳✳7 or press VOLSV button (if programmed). The level will remain at this loudness (referred to as the default setting) until you change the setting.
NOTE: Impact SCS
•There are four ringer loudness levels (plus an off position). Set these levels as follows:
1.While your telephone is
NOTE: If you set the ringer to the “off” position, your telephone will sound a short ring burst once for each call you receive at your station while the ringer is off.
LCD Speakerphone Reference Manual 7 – 13