Visioneer 7300 manual To change a profile you created, To delete a profile you created

54VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE

The Save Profile dialog box opens.

3.Type a name for the new profile and select desired options:

■Store the custom output image size in this Profile—You can create a custom image size as part of the settings; if you adjusted the output image size for the selected configuration, that output image size is saved with this profile. See “Saving a Custom Size” on page 50 for more about a custom image size.

■Save the custom Response Curve and store it in this profile— You can also create custom settings for the colors of a scanned image. Those color settings are called the Response Curve. Select this option to save the response curve settings with this profile. See “Adjusting Gamma, Saturation, and Color Hue” on page 44 for more about the response curve settings.

4.Click OK to save the profile and add it to the configuration list.

To change a profile you created:

1.Select your profile from the configuration list.

2.Make changes to the profile as needed, and then click Save.

To delete a profile you created:

■Select your profile from the configuration list, and then click Delete.