COVER INSTALLATION
1.Inflate cover with air pump provided. Do not over inflate.2.Place cover on filled spa. Be sure it is correctly positioned.

3.Position the tie-down hardware on the side of the spa so that they are easily reached by the cover tie-down straps.

4.Allow for about a 1/2” to 3/4” slack in the tie- down strap to make it easy to insert the strap into hardware and to compensate for vinyl shrinkage in cold weather.

5.Attach hardware with screws provided.

6.Keep cover fastened down at all times when not in use. The cover locking hardware may be locked with a key (provided).

DOWN STRAP

COVER

LOCK

CAUTION: FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS MAY RESULT IN INJURY OR DROWNING. DO NOT STAND, SIT OR LIE ON OR PERMIT ANY HEAVY WEIGHT TO REST ON THE COVER. THE INFLATABLE COVER IS NOT A FLOATATION DEVICE AND IS MADE AS AN INSULATING DEVICE AND SHOULD NOT BE USED FOR ANY OTHER PURPOSE.

Never cover your Voyager with a transparent plastic covering. The UV rays from the sunlight may cause your liner to change color and shorten its life.

PAGE 8