STEP ASSEMBLY INSTRUCTIONS (Optional Accessory)

Parts Check List:

(2) Side Panels(2)Step Treads (one curved, one straight)(1)Strip of Foam Squares

1.USING SHARP KNIFE, carefully cut the

two locking wedges off the ends of the steps and save. (see figure 1).

2.LAY ONE OF THE SIDE PANELS

DOWN. Push the end of the step into the

openings on the side panel making sure the front edge of the step is flush with the front edge of the side panel. Repeat for second step. (See figure 2) Note: top step is curved.

3.SECURE EACH STEP by tapping a locking wedge in between the side panel and the top surface of the step. (See figure 3).

4.PEEL OFF A FOAM SQUARE and

apply one to each of the bottom four corners to prevent the step from slipping. (See figure 4).

FIGURE 1

FIGURE 2

FIGURE 3

FIGURE 4

PAGE 9