Vita Spa Portable Spa 7. INSTALL THE BOTTOM BELT aligning the belt spindle, FILL UP SPA, with the top one, “Initial Start Up Procedures.”, 8. P, PAGE, LACE THE THERAPY MODULE

7. INSTALL THE BOTTOM BELT aligning the belt spindle		SEAM
with the top one.
	IMPORTANT: THE SPA WALLS AND
	INTERLOCKING PINS HAVE NOT BEEN
	DESIGNED TO SUPPORT THE WEIGHT OF THE
	WATER OVER EXTENDED PERIODS OF TIME.
	THE BANDS MUST BE INSTALLED TO PROVIDE
	THE STRUCTURAL AND LOAD SUPPORT TO THE
	SPA WALLS. FAILURE TO INSTALL THE BELTS
	COULD CAUSE TEARING AT THE WALL HINGES	7
	AND WILL VOID THE WARRANTY.

8. PLACE THE THERAPY MODULE over the wall, the belt spindles and the seat with the punched hole. When placing the module, make sure the inside lower edges of the module are kept away from the liner to prevent tearing it.

INTAKE

TUBE

PUNCHED	8
HOLE

9.FILL UP SPA and follow the instructions listed in “Initial Start Up Procedures.”

DO NOT PLUG IN THE THERAPY MODULE
UNTIL THE SPA HAS BEEN FILLED AND	9
PRIMED PROPERLY.

PAGE 7