FIG. A | FIG. B |
5.Three different assemblies can be removed for service.
a.The control system including the control panel. (FIG. A)
b.The pump assembly. ( FIG B )
c.The entire equipment assembly (Control System and Pump Assembly)
6. REMOVAL OF THE CONTROL SYSTEM
a.Lift the topside control pad from the cowling by prying it up and feed through the opening under it into the therapy module.
b.Disconnect the pump power supply cord from the metal control box.
c.Reach through the access door and loosen the 2 heater nuts (1 & 2 FIG. A)
7.Reach through the side of the therapy unit and lift and remove the control system with the control panel and power cord.
8.Package the equipment so that no damage may be done to the control pad wiring or the sensors attached to the heater assembly. Leave the GFCI power cord attached to the equipment and carefully coil it so that no damage may occur during shipping.
9.When the equipment is returned, replace it by reversing the order of removal.
PAGE 27