| SPA WATER TROUBLESHOOTING | |
SYMPTOM | PROBABLE CAUSE | SOLUTIONS |
Cloudy Water | Inadequate filtration/dirty filter | Clean filter with a filter cleaner or degreaser. |
| Excessive oils/organic matter | Shock the spa with “POTASSIUM PEROXY |
|
| MONOSULFATE”. |
| Improper sanitation | Increase sanitizer to recommended level. |
| High pH and/or high alkalinity | Adjust pH; add |
| Suspended particles/organic matter | Use clarifier. |
| Overused or old water | Drain the spa, clean and refill. |
Water Odor | Excessive organics | Shock the spa with “POTASSIUM PEROXY |
| /too many chloramines/ | MONOSULFATE” |
| bromamines - insufficient free |
|
| available chlorine |
|
| Improper sanitation |
| Low pH |
Chlorine Odor | Too many |
| free available chlorine |
| Low pH |
Musty Odor | Bacterial or algae growth |
Foaming | Buildup of body oils, |
| lotion and chemicals |
| resulting in soap or detergent |
| Overused or old water |
| Excessive organics |
Increase sanitizer level to recommended level.
Raise pH with
Shock the spa with “POTASSIUM PEROXY MONOSULFATE”
Adjust pH; raise pH with
Shock the spa. If problem is visible, draining and cleaning may be required.
Add defoamer; or drain and refill.
Drain and refill.
Shock with “POTASSIUM PEROXY MONOSULFATE”.
Wipe off scum with a clean rag or use mild detergent. If needed, drain, refill spa, and adjust water.
Inadequate filtration | Clean filter with a filter cleaner or degreaser. |
PAGE 18