Installing Software

Step 1: Utility Installation

1.Insert the V3765 CD into your CD-ROM drive. Don't connect the camera to the PC at this time.

2.The installation program should start automatically. If not, double click the My Computer icon on your desktop, open the CD-ROM drive, and then run the 'setup.exe' found on the installation CD-ROM.

3.Follow the on-screen instructions. All the necessary software is installed automatically. The utility program that allow the camera to 'talk' to the computer via the USB cable are also installed.

Step 2: MSD / PC Camera Driver Installation

1.To install the necessary drivers for Mass Storage Device (MSD) mode (for Windows 98 users) and PC Camera mode (all Windows users), first set the correct operational mode for that function. For example, set the Mode Dial to PC Camera mode to install those drivers, and to any other mode to install Mass Storage Device drivers.

2.Connect the small connector of the USB cable to the camera, as shown:

29

Page 33
Image 33
Vivitar 3765 instruction manual Utility Installation, MSD / PC Camera Driver Installation