Vivotek IP8335H - page 125

VIVOTEK

User's Manual - 125

80: GMT 02:00 Athens,

Helsinki, Istanbul, Riga

81: GMT 02:00 Cairo

82: GMT 02:00 Lebanon,

Minsk

83: GMT 02:00 Israel

120: GMT 03:00 Baghdad,

Kuwait, Riyadh, Moscow, St.

Petersburg, Nairobi

121: GMT 03:00 Iraq

140: GMT 03:30 Tehran

160: GMT 04:00 Abu Dhabi,

Muscat, Baku,

Tbilisi, Yerevan

180: GMT 04:30 Kabul

200: GMT 05:00

Ekaterinburg, Islamabad,

Karachi, Tashkent

220: GMT 05:30 Calcutta,

Chennai, Mumbai, New Delhi

230: GMT 05:45 Kathmandu

240: GMT 06:00 Almaty,

Novosibirsk, Astana, Dhaka,

Sri Jayawardenepura

260: GMT 06:30 Rangoon

280: GMT 07:00 Bangkok,

Hanoi, Jakarta, Krasnoyarsk

320: GMT 08:00 Beijing,

Chongging, Hong Kong, Kuala

Lumpur, Singapore, Taipei

360: GMT 09:00 Osaka,

Sapporo, Tokyo, Seoul,

Yakutsk

380: GMT 09:30 Adelaide,

Darwin

400: GMT 10:00 Brisbane,

Canberra, Melbourne,

Sydney, Guam, Vladivostok

440: GMT 11:00 Magadan,

Solomon Is., New Caledonia

480: GMT 12:00 Aucklan,

Wellington, Fiji, Kamchatka,

Marshall Is.

520: GMT 13:00 Nuku'Alofa

daylight_enable <boolean> 0 6/6 Enable automatic daylight

saving time in time zone.

daylight_dstactualmode <boolean> 1 6/7 Check if current time is under

daylight saving time.

(Used internally)

daylight_auto_begintime string[19] NONE 6/7 Display the current daylight

saving start time.

daylight_auto_endtime string[19] NONE 6/7 Display the current daylight

saving end time.

daylight_timezones string ,-360,-320,

-280,-240,

-241,-200,

-201,-160,

-140,-120,

-80,-40,0,

40,41,80,

81,82,83,

120,140,

380,400,48

0

6/6 List time zone index which

support daylight saving time.

updateinterval 0,

3600,

86400,

604800,

2592000

0 6/6 0 to Disable automatic time

adjustment, otherwise, it

indicates the seconds

between NTP automatic

update intervals.

restore 0,

<positive

integer>

N/A 7/6 Restore the system

parameters to default values

after <value> seconds.

reset 0,

<positive

integer>

N/A 7/6 Restart the server after

<value> seconds if <value>

is non-negative.

restoreexceptnet 0,

<positive

integer>

N/A 7/6 Restore the system

parameters to default values

except (ipaddress, subnet,

router, dns1, dns2, pppoe).

This command can cooperate

Contents

Main Page Rev 10: Initial release Revision History Overview Read Before Use Package Contents Symbols and Statements in this Document i Physical Description Hardware Installation Waterproof Connector J3 J7 Page DI/DO Diagram Hardware Reset SD/SDHC Card Capacity Network Deployment Network Deployment Setting up the Network Camera over the Internet Page Software Installation Ready to Use Page Accessing the Network Camera Using Web Browsers For more information about how to enable password protection, please refer to Security on page 42 Page Using RTSP Players Using 3GPP-compatible Mobile Devices Using VIVOTEK Recording Software Main Page Page Conguration Area Hide Button Resize Buttons Live Video Window The following window is displayed when the video mode is set to H264 / MPEG-4: Page The following window is displayed when the video mode is set to MJPEG: Client Settings Page Conguration System > General settings System time System > Homepage layout 34 - User's Manual Theme Options Page System > Logs System > Parameters System > Maintenance Page Page Page Security > User Account Security > HTTPS (Hypertext Transfer Protocol over SSL) https:// Page Page Page Security > Access List Filter Page Security > IEEE 802.1X Advanced Mode 1 2 3 Page Network > General settings PPPoE (Point-to-point over Ethernet) Page Page Page Page Port Page Network > Streaming protocols HTTP streaming Page Page Page Network > QoS (Quality of Service) Advanced Mode Page Network > DDNS Page Page Network > SNMP (Simple Network Management Protocol) Media > Image Day/Night Settings Preference Sensor Setting 2: For special situations Sensor Setting 1: For normal situations Page Page Note that if WDR function is enabled, the Exposure level menu will be disabled! Page Page Media > Video Stream settings Page Page Page Media > Audio Audio Settings PTZ > PTZ settings Page x2.0 Page Page x2.1 Page Page Event > Event settings Page Page Add server Page Page Page Add media Page Page Page Page Applications > Motion detection Page Page Applications > DI and DO Applications > Tampering detection Recording > Recording settings Page Page Page Page Local storage > SD card management Local storage > Content management Page Appendix URL Commands for the Network Camera 1. Overview 2. Style Convention 3. General CGI URL Syntax and Parameters 4. Security Level 5. Get Server Parameter Values 3. General CGI URL Syntax and Parameters 4. Security Level 5. Get Server Parameter Values Example: Request IP address and its response 6. Set Server Parameter Values 6. Set Server Parameter Values [<parameter pair>] Only the parameters that you set and are readable will be returned. 7. Available parameters on the server Page 7.1 system Page Page Page 7.1.1 system.info 7.2 status 7.3 digital input behavior define 7.4 digital output behavior define 7.2 status 7.3 digital input behavior define 7.4 digital output behavior define 7.5 security 7.6 network Page 7.6.1 802.1x 7.6.2 QOS 7.6.3 IPV6 7.6.4 FTP 7.6.3 IPV6 7.6.4 FTP 7.6.5 HTTP 7.6.6 HTTPS port 7.6.7 RTSP 7.6.7.1 RTSP multicast 7.6.8 SIP port 7.6.7.1 RTSP multicast 7.6.8 SIP port 7.6.9 RTP port 7.6.10 PPPoE 7.7 IP Filter Page 7.8 Video input 7.8.1 Video input setting per channel Page Page Page 7.8.1.1 Alternative video input profiles per channel 7.9 Video input preview 7.10 IR cut control Page 7.11 Image setting per channel 7.12 Image setting for preview Page 7.13 Exposure window setting per channel 7.14 Audio input per channel 7.15 Motion detection settings Page 7.16 Tempering detection settings 7.17 DDNS 7.18 Express link 7.19 UPnP presentation 7.20 UPnP port forwarding 7.18 Express link 7.19 UPnP presentation 7.20 UPnP port forwarding 7.21 System log 7.22 camera PTZ control 7.23 UART control 7.22 camera PTZ control 7.23 UART control Page 7.24 SNMP 7.25 Layout configuration 7.26 Privacy mask 7.27 Capability 7.26 Privacy mask 7.27 Capability Page Page Page Page 7.28 Customized event script 7.29 Event setting 7.28 Customized event script 7.29 Event setting Page 7.30 Server setting for event action Page 7.31 Media setting for event action 7.32 Recording Page 7.33 HTTPS 7.34 Storage management setting 7.35 Region of interest 7.34 Storage management setting 7.35 Region of interest 7.36 ePTZ setting Page 8. Useful Functions 8.1 Drive the Digital Output (capability.ndo > 0) 8.2 Query Status of the Digital Input (capability.ndi > 0) Page 8.3 Query Status of the Digital Output (capability.ndo > 0) 8.4 3D Privacy Mask 8.5 Capture Single Snapshot Page 8.6 Account Management 8.7 System Logs 8.8 Upgrade Firmware Page 8.9 Camera Control (capability.ptzenabled) Page 8.10 ePTZ Camera Control (capability.eptz > 0) 8.11 Recall (capability.ptzenabled) 8.12 ePTZ Recall (capability.eptz > 0) 8.11 Recall (capability.ptzenabled) 8.12 ePTZ Recall (capability.eptz > 0) 8.13 Preset Locations (capability.ptzenabled) 8.14 ePTZ Preset Locations (capability.eptz > 0) Page 8.15 IP Filtering 8.16 UART HTTP Tunnel Channel (capability.nuart > 0) Page 8.17 Event/Control HTTP Tunnel Channel (capability. evctrlchannel > 0) 8.18 Get SDP of Streams 8.19 Open the Network Stream Page 8.20 Senddata (capability.nuart > 0) 8.21 Storage managements (capability.storage.dbenabled > 0) Page 8.22 Virtual input (capability.nvi > 0) Page Page Page 8. 24 Open Anystream (capability.nanystream > 0) Page User's Manual - 195 dependent> Dimensions IR Illuminators Technical Specications Specications Lens Field of View Shutter Time Technology License Notice MPEG-4 AAC Technology MPEG-4 Visual Technology AMR-NB Standard Electromagnetic Compatibility (EMC)