rtsp://192.168.5.151:554/live.sdp

VIVOTEK

Authentication: Depending on your network security requirements, the Network Camera provides three

types of security settings for streaming via RTSP protocol: disable, basic, and digest.

If basic authentication is selected, the password is sent in plain text format, but there can be potential risks of it being intercepted. If digest authentication is selected, user credentials are encrypted using MD5 algorithm, thus providing better protection against unauthorized access.

The availability of the RTSP streaming for the three authentication modes is listed in the following table:

 

Quick Time player

Real Player

Disable

O

O

Basic

O

O

Digest

O

X

Access name for stream 1 ~ 2: This Network camera supports multiple streams simultaneously. The access name is used to differentiate the streaming source.

If you want to use an RTSP player to access the Network Camera, you have to set the video mode of the corresponding stream to H.264 / MPEG-4and use the following RTSP URL command to request transmission of the streaming data.

rtsp://<ip address>:<rtsp port>/<access name for stream 1 or 2> For example, when the access name for stream 1 is set to live.sdp:

1.Launch an RTSP player.

2.Choose File > Open URL. A URL dialog box will prompt.

3. Type the above URL command in the address field.

4. The live video will be displayed in your player as shown below.

Video 16:38:01 2011/03/25

RTSP port /RTP port for video, audio/ RTCP port for video, audio

RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554.

The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by monitoring the Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port for audio is set to 5559.

The ports can be changed to values between 1025 and 65535. The RTP port must be an even number and the RTCP port is the RTP port number plus one, and thus is always an odd number. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message will be displayed:

User's Manual - 63

Page 63
Image 63
Vivotek IP8335H manual Disable Basic Digest