
VIVOTEK
Preference
On this page, you can tune the Image adjustment parameters. You can configure two sets of preferred settings: one for normal situations, the other for special situations, such as day/night/schedule mode.
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations
White balance: Adjust the value for the best color temperature.
■ Auto
The Network Camera automatically adjusts the color temperature of the light in response to different light sources. The white balance setting defaults to Auto and it works well in most situations.
■ Keep current value
Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions.
1.Set the White balance to Auto and click Save.
2.Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color temperature automatically.
3.Select Keep Current Value to confirm the setting while the white balance is being measured.
4.Click Save to enable the new setting.
Image Adjustment
■Brightness: Adjust the image brightness level, which ranges from
■Saturation: Adjust the image saturation level, which ranges from
Customize and manually enter a value.
■Contrast: Adjust the image contrast level, which ranges from
■Sharpness: Adjust the image sharpness level, which ranges from
■Enable low light compensation: Select this option in low light mode, and the values of sharpness and brightness will change automatically with the noise reduction function.
User's Manual - 73