VIVOTEK

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the settings.

If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open the Profile settings page as shown below.

2011/03/13 17:08:56

Please follow the steps below to setup a profile:

1.Check Enable and apply this profile.

2.Select one of the applicable modes: Day mode, Night mode, or Schedule mode. Please manually enter a range of time through which you want the Schedule mode to apply.

3.Configure Exposure control settings in the folowing columns. Please refer to the previous page for detailed information.

4.Click Save to enable the setting and click Close to exit the page.

User's Manual - 77

Page 76 Page 78
Page 77
Image 77
Vivotek IP8335H manual 2011/03/13
Page 76 Page 78
Top Page Image Contents