VIVOTEK
User's Manual - 71
Media > Image Advanced Mode

This section explains how to configure the image settings of the Network Camera� It is
composed of the following four columns: General settings, Preference, Exposure, and Privacy
mask�
General settings
Timestamp and video title: Enter a name that will be displayed on the title bar of the live video as the
picture shown below� The manually written title will be displayed with every video live view�
Zoom factor: If you check this item, the zoom indicator will be displayed on the Home page when you
zoom in/out the live viewing window as the picture shown below� You may zoom in/out the image by
scrolling the mouse inside the live viewing window�
Video 2011/03/13 17:08:56
Title and Time
Video (TPC-AV)
Video Title
Video orientation: Flip--vertically reect the display of the live video; Mirror--horizontally reect the display
of the live video� Select both options if the Network Camera is installed upside-down (e�g�, on the ceiling)
to correct the image orientation. Please note that the e-PTZ preset locations will be cleared after ip/
mirror�
Color: Select to display color or black/white video streams�
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights� Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect�