VIVOTEK
User's Manual - 151
7.22 camera PTZ control
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME
VALUE
DEFAU LT
SECURITY
(get/set)
DESCRIPTION
panspeed
-5 ~ 5
0
1/4
Pan speed
tiltspeed
-5 ~ 5
0
1/4
Tilt speed
zoomspeed
-5 ~ 5
0
1/4
Zoom speed
focusspeed
-5 ~ 5
0
1/4
Auto focus speed
patrolseq
string[120]
<blank>
1/4
(For external device)
The indexes of patrol
points, separated by “,”
patroldwelling
string[160]
<blank>
1/4
(For external device)
The dwelling time of each
patrol point, separated by
“,”
preset_i<0~(npreset-1)>_name
string[40]
<blank>
1/4
Name of the preset
location.
uart
0 ~ (m-1),
m is UART
count
0
1/4
Select corresponding uart
(capability.nuart>0).
cameraid
0~255
1
1/4
Camera ID controlling
external PTZ camera.
isptz
0 ~ 2
0
1/4
0: disable PTZ commands.
1: enable PTZ commands
with PTZ driver.
2: enable PTZ commands
with UART tunnel.
disablemdonptz
<boolean>
0
1/4
Disable motion detection on
PTZ operation.
7.23 UART control
Group: uart (capability.nuart > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ptzdrivers_i<0~19,
127>_name
string[40]
1/4
Name of the PTZ driver.
ptzdrivers_i<0~19,
127>_location
string[128] < product
dependent >
1/4 Full path of the PTZ driver.
enablehttptunnel <boolean> 0 4/4 Enable HTTP tunnel channel to
control UART.
Group: uart_i<0~(n-1)> n is uart port count (capability.nuart > 0)
NAME VALUE DE FAULT SECURITY
(get/set)
DESCRIPTION
baudrate 110,300,600,120
0,2400,3600,480
0,7200,9600,192
00,38400,57600,
115200
9600 4/4 Set baud rate of COM port.
databit 5,6,7,8 8 4/4 Data bits in a character frame.
paritybit none,
odd,
even
none 4/4 For error checking.
stopbit 1,2 1 4/4 1
2-1.5 , data bit is 5
2-2
uartmode rs485,
rs232
rs485 4/4 RS485 or RS232.
customdrvcmd_i<0~
9>
string[128] <blank> 1/4 PTZ command for custom
camera.
speedlink_i<0~4>_n
ame
string[40] <blank> 1/4 Additional PTZ command name.
speedlink_i<0~4>_c
md
string[128] <blank> 1/4 Additional PTZ command list.
ptzdriver 0~19,
127 (custom),
128 (no driver)
128
(no driver)
4/4 The PTZ driver is used by this
COM port.