www.vtechphones.com 15
Basic operation
Telephone operation
Telephone operation
Intercom
The intercom feature allows convers ation between two
registered handsets of the same system.
Model DS6121-2
Press INT on the originating handset when the handset is not in
use and its screen displays CALLING OTHER HANDSET.
The destination hand set rings and i ts screen displays
OTHER HANDSET IS CALLING.
To answer the intercom call, press /FLASH, /SPEAKER,
INT or any dialing key (0-9,#,*) on the destination handset.
To end an intercom call, press INT, OFF/CLEAR or place
the handset back in the telephone base or charger.
Models DS6121-3/DS6121-4/D S6121-5/DS6122-5
Press INT on the originating handset when the handset is
not in use. The screen displays INTERCOM TO:
Use the dialing keys to select the destination handset. The
originating handset screen displays CALLING HANDSET X.
The destination hand set rings and i ts screen displays
HANDSET X IS CALLING.
To answer the intercom call, press /FLASH, /SPEAKER,
INT or any dialing key (0-9,#,*) on the destination handset.
To end an intercom call, press INT, OFF/CLEAR or place
the handset back in the telephone base or charger.
1.
2.
3.
4.
1.
2.
3.
4.
5.
INTERCOM TO:
HANDSET X
IS CALLING
CALLING
HANDSET X
If the destination
handset does
not answer
the intercom
call within 100
seconds, is in
the directory, is
in the call log,
is on a call, or
out of range,
the originating
handset screen
will display
UNABLE TO
CALL TRY AGAIN
and return to idle
mode.
•
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING