Battery
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:
Operation | Operating time |
|
|
While in handset use (talking*) | Nine hours |
|
|
While in speakerphone mode (talking*) | One and a half hours |
|
|
While not in use (standby**) | Five days |
|
|
*Operating times are approximate. Your results may vary. **Handset is off the telephone base but not in use.
The battery needs charging when:
•A new battery is installed in the handset.
•The handset beeps.
•LOW BATTERY is displayed and the battery indicator on the handset screen is flashing.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800)
•Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions.
•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.
•Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns.
•Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.
www.vtechphones.com | 51 |
Appendix
