Charge/In | VTech IA5824 guide

Troubleshooting

Problem	Suggestion
The CHARGE/IN	• This is a signal that the battery is very low, completely depleted, or when there is no electrical
USE Indicator on the	contact between the battery and the telephone base.
telephone base is	• Ensure the connector of the battery is securely plugged into the handset and place the handset in
flashing	the telephone base for charging.
There is no dial tone.	• First, try all the above suggestions.
	• Move the cordless handset closer to the telephone base. It might be out of range.
	• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
	• Disconnect the telephone base from the telephone jack and connect a different telephone. If there
	is no dial tone on the telephone either, the problem is in your wiring or local service. Contact your
	local telephone company.

ion i informational Add

www.vtechphones.com

31

Image 34

VTech IA5824 warranty Charge/In

Contents

Table of contents Rbrc seal Need HELP? Parts checklist Belt clip Telephone line cord User’s manual Connect power and telephone line cords InstallationModular telephone jack Standard electrical outlet Install handset battery Choose location Wall mounting bracket installation optional Desk/table bracket installation If you subscribe to DSL service Headset jack Belt clip optionalTo attach Telephone operation Handset layout Message waiting indicator Telephone base layout Ending Calls Handset operationMaking calls Answering calls VOL+ directory VolumeProg program Voice mail indicator Telephone base operation Set handset date and time Set dial modeSet language Check for dial tone Handset ringer style/battery save Charge the handset batteryRinger volume Operating range Temporary tone dialingPress TALK/FLASH 540 PM Voice mailClear voice mail alert Press or to select YES or no Press Select to confirm Display screen messages Directory Store a directory entry Edit a directory entry Press Select to save the edited information Erase a directory entry Move a directory entry to the speed dial Dial a directory number Press SELECT. The screen displays Enter Speed dial Store a speed dial entry Edit a speed dial entry Press SELECT. The screen displays the name and number. Dial a speed dial number Erase a speed dial entryReassign locations in speed dial Caller ID Caller’s telephone number Caller’s name Time of call About call history caller IDReview call history Position of call in call history Date of call Store a call history record in the directory Delete records from call historyDial a displayed number Delete a specific call Other party is blocking name and/or number 540PM12/30 Dial Program540PM12/30 Distinct RING? N Information Replace the handset battery Battery informationBattery care and maintenance Battery needs charging when Troubleshooting Battery LOW is This user’s manual For the cordless handset and telephone base to resetCharge light is off in this section This user’s manual for further instruction CHARGE/IN Apply This to take place You may be too far from the telephone base Make sure the power cord is pluggedHandset to its base when not in use Try unplugging some of the other phones Before dialing Using the telephoneCannot dial out First, try all the above suggestions Mode Additional information Call waiting Caller ID service My caller ID featuresSystem does not Computers, kitchen appliances and other cordless telephones My cordless handsetOne minute for this to take place Maintenance Limited Warranty How do you get warranty service? Important safety instructions FCC, Acta and IC regulations Rbrc seal Technical specifications Index Voice mail indicator 11 Volume 10 Wall mounting V0.5 91-000906-040-100 User’s manual