Programming Menu Buttons
1.Before entering the program mode, you must first press a Menu Button. Press Menu Button #1. Its LED will light.
2.To enter Program mode, press and hold both 
and 
simultaneously until time display shows "PROG" (approximately 2 seconds). The LED on Menu Button #1 and Cooking Process Indicator will start blinking.
3.Cook function time and temperature will be programmed first.
Press and hold 
while pressing 
or 
to adjust to temperature desired.
•Maximum allowable temperature setting is 480°F (249°C); minimum is 32°F (0°).
Press and hold 
while pressing 
or 
to adjust to time desired.
•Maximum time setting is 5 hours, 59 minutes.
4.Program the Grill function for Menu Button #1.
Press 
. The Grilling Process Indicator and LED on Menu Button #1 will start blinking.
Press and hold 
while pressing 
or 
to adjust to temperature desired.
•Maximum allowable temperature setting is 480°F (249°C); minimum is 32°F (0°C).
Press and hold 
while pressing 
or 
to adjust to time desired.
5.Program the Warm/Hold function for Menu Button #1.
Press 
. The Warm/Hold Process Indicator and LED on Menu Button #1 will start blinking.
Press and hold 
while pressing 
or 
to set temperature for the hold cycle.
You cannot program a time for the warm/hold function. If you try to program a time, the buzzer will sound for 3 seconds, then shut off. After programming of Menu Button #1 is completed, the time display will show the current time of day.
6.Press flashing Menu Button #1 to lock in the programmed settings.
After programming, the display will show the time and temperature programmed for the Cook function. If you have programmed "0" time and minimum temperature (32°F [0°C]) for the Cook function, the displays will show the actual cavity temperature and actual time of day.
7.Continue programming Menu Buttons
Verifying Programmed Temperatures and Times
Cook function: Press and hold the desired Menu Button, then press 
.
Grill function: Press and hold the desired Menu Button, then press 
.
Warm/Hold : Press and hold the desired Menu Button, then press 
.
•Only the temperature will be displayed in the Warm/Hold function.
•Time display will show "00:00".
– 14 –
