SETTING UP THE CINTIQ STAND

Place the stand on your desktop or work surface. Make sure the stand is stable and will not tip or fall when the pen display is mounted on it. Then familiarize yourself with the stand components.

Do not operate the incline adjustment levers when Cintiq is not mounted on the stand, and do Warning not lift the stand by the adjustment levers. The stand is spring-loaded and may cause injury or

damage if released without the weight of Cintiq on the stand. Improper operation may lead to physical injury or damage to the stand. Be careful to avoid catching your finger in the gap of the movable portion of the stand.

Incline adjustment levers

When Cintiq is mounted on the stand, use these levers to adjust the display incline, as described in “Adjusting the display incline” on page 12.

Bearing recess

Front feet

The front feet have rubber pads to reduce slippage on the desktop.

Rear feet

The rear feet are on rollers, allowing them to move when adjusting incline.

Next step: Unpack the pen display and mount it on the Cintiq stand. See page 11.

Unpacking your Cintiq

Page 10